ABR 600


Features & Specs



ABR 600 is a dense, creamy solution containing specific abrasives for the restoration of surfaces in general. Multi functional, product can be used on various materials thanks to its honing microabrasive action. When used on calcium based materials, product removes imperfections and abrasions leaving a uniform soft “mat” finish. On ceramic, product removes general imperfections, deep scratches without altering the original surface gloss. Product can be used in conjunction with K100 on sensible acidic materials for simple surface restoration, or when K100 does not achieve the desired result. ABR600 can also be used in situations where the gloss or shine has to be removed with etching or using acidic based solutions.

Related Resources


Test on a small area before proceeding, so to ensure product suitability and final result. Apply product to small workable areas at a time. (approx 2sqm). Remove all previous applied waxes or top coats before applying product. Sprinkle product over the area to be treated and add water so to form a creamy/pasty mixture. Proceed to buff surface (175 rpm) using a white nylon pad, making sure that the mixture does not dry out. If necessary add water to the mixture. Check gloss regularly and continue until desired gloss is obtained. Remove all product residue with clean water and squeegee or wet vacuum. Rinse surface. On extreme honed or consumed surfaces, apply 20/30 gr. of product per sqm and buff with at least 20 passes. Maintenance: on material with extreme foot traffic, maintain surface with 10/20 gr. of product per sqm and buff with at least 15 passes.  

Aspect CREAM
colour - odour GREY - odourless
ph (5% in water) 6,5 - 7,5
Specific gravity (20°) N/A
flash point not flammable

Please login to review this product