WATER BASED, COLOUR ENHANCER FOR GRES AND CERAMIC
DESCRIPTIONHIDRO 330/A is a water based, stain proof, colour enhancer studied for the industrial treatment of porcelain stoneware. Its ecological formulation guarantees a water and oil resistant surface, while enhancing the natural colours of the stoneware. Highly recommended as pre treatment so to avoid problematic grout haze to be removed after setting. Compatible on humid or damp surfaces, therefo- re saving time during application process.
USEProduct can be diluted. Test product, its suitability and desired result on material to be treated in order to determine correct dilution ratio. Apply uniformly by brush, roller or spray. After 5-10 minutes, remove any excess residues by clean cloth or buffer and allow surface to dry for 6 hours. Small areas can be buffed manually to remove excess product. Resume normal use of treated surface after surface is completely dry. Industrial inline applications: Apply product within the production line by spray, roller or other uniformly to tile surface. Remove product residues mechanically by nylon felt pad after estimating the correct drying time based on production line. Once removed, material can proceed to be packed. (before proceeding with application, test material first as several variables can be present that influence product application)
|colour - odour||white - odourless|
|ph (5% in water)||6 - 7|
|Specific gravity (20°)||1010 +/- 5 g/lt|
|flash point||not flammable|