WATER BASED, TRAFFIC RESISTANT “SATIN LOOK” POLYMER
DESCRIPTIONHIDROFAB is a speciﬁc water based polymer for surface treatment of natural stone surfaces. Product protects material in high trafﬁc areas from dirt/scratches, supplying the surface a protective “satin look” effect. Excellent adhesion and water/dirt repellent properties, treatment allows surface to breathe without changing the natural stone colours or eventual yellowing. Treatment will not build-up and does not require periodic stripping. Facilitates future ﬂoor maintenance.
USEDilute only when applying to porcelain stoneware or when using as periodic maintenance on a pre treated surface. First Application: Apply by cloth, mop or lamb’s wool applicator on clean and dry surfaces. Smooth out any uneven product applica- tions and excess. Allow approx 4 hours curing time, before resuming normal use of the treated surface. (if necessary, apply a second coat to the surface after 4 hours from the ﬁrst.) Maintenance: (the frequency of maintaining ﬂoor surfaces depends on amount of foot trafﬁc and surface stress). Dust mop surface and remove surface debris before proceeding. Apply a diluted solution of HIDROFAB and water (dilution ratio 1:4) by mop or lamb’s wool applicator, applying evenly the product to the area to be maintained. Allow surface to dry for approx 4 hours before resuming normal use of the treated surface.
|colour - odour||WHITE - TYPICAL|
|ph (5% in water)||8-9|
|Specific gravity (20°)||1020 +/- 5 G /LT|
|flash point||not flammable|