HIDROFAB/AR

WATER BASED POLYMER

Features & Specs

 

DESCRIPTION

HIDROFAB/AR is a specific water based polymer for surface treatment of natural stone surfaces. Product protects material in high traffic areas from dirt/scratches, supplying the surface a protective “mat look” effect. Excellent adhesion and water/dirt repellent properties, treatment allows surface to breathe without changing the natural stone colours or eventual yellowing. Treatment will not build-up and does not require periodic stripping. Facilitates future floor maintenance.  

Related Resources

USE

Dilute only when applying to porcelain stoneware or when using as periodic maintenance on a pre treated surface. First Application: Apply by cloth, mop or lamb’s wool applicator on clean and dry surfaces. Smooth out any uneven product applications and excess. Allow approx 4 hours curing time, before resuming normal use of the treated surface. (if necessary, apply a second coat to the surface after 4 hours from the first.) Maintenance: (the frequency of maintaining floor surfaces depends on amount of foot traffic and surface stress). Dust mop surface and remove surface debris before proceeding. Apply a diluted solution of HIDROFAB/AR and water (dilution ratio 1:4) by mop or lamb’s wool applicator, applying evenly the product to the area to be maintained. Allow surface to dry for approx 4 hours before resuming normal use of the treated surface.

Aspect MILKY   LIQUID
colour - odour WHITE   - TYPICAL
ph (5% in water) 8-9
Specific gravity (20°) 1015 +/- 5 G/LT
flash point not flammable

Please login to review this product