K 100


Features & Specs



K100 is a water based, acidic, multifunctional, polishing cream.  Specific for the maintenance and restoration  of dull surfaces, scratches and water marks. Application unifies surface  aspect, while increasing surface  gloss matching  results obtained by traditional polishing powders on limestone sur- faces.  Product  works chemically and mechanically by reacting with the material hardening  the natural structure  of the stone, therefore increasing resistance to general foot traffic. Highly recommended on terrazzo  and marble agglomerates, enamelled  & lapped  ceramic surfaces where product  will restore brightness and remove surface  scratches    

Related Resources


Test on a small area before proceeding, so to ensure  product  suitability and final result. Apply product  to small workable areas  at a time. (approx. 2 sqm). Remove all surface  debris and previous applied waxes  or top coats before applying product. Shake  container  before use.   Apply product  over the area to be treated and add water so to maintain a creamy/pasty mixture. Proceed to buff surface  (175 rpm) using a white nylon pad,  making sure that the mixture does  not dry out. If necessary add water to the mixture. Check gloss regularly and continue  until desired  gloss is obtained.   Remove all product  residue  with clean water and squeegee or wet vacuum.  Rinse surface.   Note: on extreme  honed  or consumed surfaces, apply 20/30  gr. of product  per sqm and buff with at least 20 passes. Maintenance: on material with extreme  foot traffic, maintain surface  with 10/20  gr. of product  per sqm and buff with at least 15 passes. For traditional spray buffing maintenance proceed to use “Neutral Crystallizer” as directed.

Aspect CREAM
colour - odour WHITE   - ODOURLESS
ph (5% in water) 1,5 - 2,5
Specific gravity (20°) N/A
flash point not flammable

Please login to review this product