K 500


Features & Specs



K500 is a water based, polishing cream. Specific for the maintenance and restoration of engineered stone (quartz surfaces) where normally particular machinery, long hours and water are required. Product renews dull and consumed surfaces, scratches and water marks. Application unifies surface aspect, while increasing surface gloss. Product works chemically and mechanically by reacting with the material hardening the natural structure of the stone, closing the surface pores therefore increasing resistance to general foot traffic and surface dirt. Product allows maintenance of large surfaces in an effective and simple manner.  

Related Resources


Test on a small area before proceeding, so to ensure product suitability and final result. Apply product to small workable areas at a time. (approx. 2 sqm). Remove all surface debris and previous applied waxes or top coats before applying product. Shake container before use. Apply a small amount of product to the area to be treated and proceed to buff (175 rpm) using a white nylon pad. Buff until haze is completely gone and natural shine appears on the floor. Repeat operation if required. Rinse floor with clean water and wet vacuum. Small corrosions or scratches can be removed manually. Maintenance: For traditional spray buffing maintenance proceed to use “Neutral crystallizer” as directed

Aspect CREAM
colour - odour WHITE - ODOURLESS
ph (5% in water) 6 - 7
Specific gravity (20°) 1070 +/- 10 G/LT
flash point not flammable

Please login to review this product